|
Fibre Channel
Target Emulation GargantuLUN
Gillaspy Associates presents the SANBlaze GargantuLUN 12 and 24 port target
disk drive emulation systems for Fibre Channel. These drive emulation
systems provide a virtual, cost-efficient, configurable environment for
SAN product development, testing and QA. An essential tool for SAN Development,
QA and Test Labs.
Density Same features as our VirtuaLUN product with higher port density.
Available configurations:
* 24 ports, 2G Fibre Channel
* 12 ports, 4G Fibre Channel
* 24 Ports, 4G Fibre Channel (available Q2 2006)
Simulate JBODS Configuration flexibility allows for a 24 port systems
to simulate, for example: (ports x disks)
* Twenty Four 1 x 8 JBODS * Six 4 x 4 JBODS * Twelve 2 x 8 JBODS * etc....
Full Featured Same feature set as the VirtuaLUN
* Configurable
* Variable drive parameters
* Error Injection
* Variable LUN Size
* Full Command Line Interface
* Easy to use Web Interface
* Full Scripting support
Features
* 12 or 24 Fibre Channel Ports
* Up to 125 Targets Per port
* 4 LUNS per target for a possible 500 LUNS per port
* 256 LUNS on a single target in Point to Point mode
* LUN size up to 2 TB
* 16 GB of internal memory
* Tape Emulation
* Simple and instantaneous configuration of a single or multiple LUNS
* Editable LUN attributes include:
o Size
o Delay
o Health
o Errors
* Ability to inject disk and physical errors
* Easy to use web based interface
* Text based scripting interface
* 1, 2 and 4 G Fibre Channel speeds
* Triple redundant power supplies
* Dual Xeon Processors
Good Drive
By default, a target drive is configured with zero latency and no errors.
Features such as Definable Mode Pages, Editable Inquiry String, Definable
WWPN and WWNN allow the target drive to look like any type of drive you
want.
Bad Drive
Extensive error injection capabilities allow for the creation of varying
and repeatable error conditions and predefined bad drive behaviors.
Fast Drive
100,000 iop ’s per port, Over 250,000 iop's across 4 ports. Full
speed reads and writes at 4G Fibre Channel
Slow Drive
Latency can be set from Zero to many minutes, allowing systems under test
to see how they respond to very slow drives.
Big Drive
Drives can be set to be as large as 2 TBytes
Small Drive
Drives can be configured to be as small as 4 M
1 Drive
Each of the configurations can be set for a single drive
1000 Drives
The product supports:
* 24 ports, 2G Fibre Channel
* 12 ports, 4G Fibre Channel
* 24 Ports, 4G Fibre Channel (available Q2 2006)
Since 1997, Gillaspy Associates has built a solid reputation for developing
strong relationships with our customers by providing quality solutions
and ongoing support.
|
Downloads
GargantuLUN
12 & 24 Port Datasheet
Fibre Channel Target
Emulation System Features
White Paper:
Using SAN Target Emulation Systems in Test, QA and Design Verification
Labs
Related Pages
VirtuaLUN 2,4 or 6 Ports
SAS Systems
VirtuaLUN SAS 8 or 12 Port
Case Studies
New Product Development
Video System Troubleshooting
SANBlaze
Training Courses
Gillaspy currently offers the following training courses:
SAS
ML270 - Serial Attached
SCSI Architecture & Instrumentation
Fibre Channel
ML250 - Fibre Channel
Systems Architecture & Instrumentation
ML350 - In-depth Fibre Channel
Analysis
iSCSI
ML280 - iSCSI Architecture
and Instrumentation
FCIP
ML240 - Introduction to Fibre
Channel Over IP (FCIP)
MCE: Medusa Certified Engineer
MC100 - Xgig Analyzer
MC125 - NetWisdom SAN
Performance Monitoring System
SATA
Serial ATA Architecture
IO Bus
PCI™ Architecture
PCI™ Overview
PCI-X™ Architecture
PCI-X™ Overview
PCI Express ™
Architecture
PCI-Express™
Overview
Intel Pentium
4/m/Xeon
USB Architecture (Core
Topics)
USB Architecture (LS/FS
Only)
USB Architecture (HS
Only)
Contact Gillaspy Assocates at 805-987-1959 to schedule an on-site class.
|